# Wazer not cutting through 3mm of glass

**URL:** <https://community.wazer.com/t/wazer-not-cutting-through-3mm-of-glass/2142>\
**Category:** Help & Support\
**Created:** [August 18, 2026, 7:39pm UTC](https://community.wazer.com/t/wazer-not-cutting-through-3mm-of-glass/2142 "2026-08-18T19:39:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![carolcarson](https://avatars.discourse-cdn.com/v4/letter/c/7c8e57/32.png) [@carolcarson](https://community.wazer.com/u/carolcarson)\
**Post date:** [August 18, 2026, 7:39pm UTC](https://community.wazer.com/t/wazer-not-cutting-through-3mm-of-glass/2142/1 "2026-08-18T19:39:27Z")

</div>

I am trying to cut one sheet of 3mm glass, and the Wazer Pro is not cutting it cleanly; only some of the parts are cut through, and others are not. Has anyone else had this problem? Any idea what the cause is?

---

<div class="post-metadata">

**Author:** ![Kristof](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.wazer.com/kristof/32/976_2.png) [@Kristof](https://community.wazer.com/u/Kristof)\
**Post date:** [August 21, 2026, 4:53pm UTC](https://community.wazer.com/t/wazer-not-cutting-through-3mm-of-glass/2142/2 "2026-08-21T16:53:19Z")

</div>

Hi, it is much easier to help identify the cause if you share pictures of the partial cuts and maybe screenshots of your WAM.

---

<div class="post-metadata">

**Author:** ![carolcarson](https://avatars.discourse-cdn.com/v4/letter/c/7c8e57/32.png) [@carolcarson](https://community.wazer.com/u/carolcarson)\
**Post date:** [August 21, 2026, 5:19pm UTC](https://community.wazer.com/t/wazer-not-cutting-through-3mm-of-glass/2142/3 "2026-08-21T17:19:33Z")

</div>

I had the cut set to ‘medium’ and found when I changed it to 'fine ', it is cutting through without a problem.