# Vibration motors

**URL:** <https://community.wazer.com/t/vibration-motors/901>\
**Category:** Help & Support\
**Created:** [February 3, 2024, 11:48pm UTC](https://community.wazer.com/t/vibration-motors/901 "2024-02-03T23:48:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![garyu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@garyu](https://community.wazer.com/u/garyu)\
**Post date:** [February 3, 2024, 11:48pm UTC](https://community.wazer.com/t/vibration-motors/901/1 "2024-02-03T23:48:29Z")

</div>

Hello everyone, new to this forum. I just got a new to me Wazer and finished setting it all up. When doing the first tests (output tests) I noticed both vibration motors are not working at all. They do not seem locked up, the green lights on the module are lit for the test but nothing. It seems odd to me that both motors would be bad. I tried running a test cut but they did not spin at all. Any ideas to try would be very much appreciated. Not sure where on the module these are connected to as well. (Older Wazer without the emergency stop)

---

<div class="post-metadata">

**Author:** ![garyu](https://avatars.discourse-cdn.com/v4/letter/g/7ab992/32.png) [@garyu](https://community.wazer.com/u/garyu)\
**Post date:** [February 5, 2024, 2:46am UTC](https://community.wazer.com/t/vibration-motors/901/2 "2024-02-05T02:46:37Z")

</div>

Turned out to be broken connections at one of the motors under the heat shrink. Problem fixed. Not not syphon action happening. Going to replace the hose next.