# Stained glass windows

**URL:** https://community.wazer.com/t/stained-glass-windows/672
**Category:** Projects
**Created:** [February 18, 2023, 4:45pm UTC](https://community.wazer.com/t/stained-glass-windows/672 "2023-02-18T16:45:56Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![Oratory](https://avatars.discourse-cdn.com/v4/letter/o/71c47a/32.png) [@Oratory](https://community.wazer.com/u/Oratory)
#### Post date: [February 18, 2023, 4:45pm UTC](https://community.wazer.com/t/stained-glass-windows/672/1 "2023-02-18T16:45:56Z")

</div>

I’m creating stained glass windows for an outdoor prayer chapel. I cut the frames with a laser from 1/4" acrylic. All of the glass was cut with a Wazer using the same cut files as the acrylic. I used 2 layer of acrylic for strength. I offset the cuts 1/8" bigger on the back sheet. Glued the two sheets together then dropped the glass pieces in from the back and sealed with silicone.

 ![IMG_0069](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/1X/4616d91a4206c9bb141e20661a345e51ba9beaf0.jpeg)  
 ![IMG_0058](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/1X/57d54f119cbd7c0cca66e2d582fe16773710e6ac.jpeg)

---

<div class="post-metadata">

### Author: ![ORU](https://avatars.discourse-cdn.com/v4/letter/o/34f0e0/32.png) [@ORU](https://community.wazer.com/u/ORU)
#### Post date: [February 20, 2023, 12:44am UTC](https://community.wazer.com/t/stained-glass-windows/672/2 "2023-02-20T00:44:29Z")

</div>

Nicely done. Nice wood work as well.

---

<div class="post-metadata">

### Author: ![hiremyWazer](https://avatars.discourse-cdn.com/v4/letter/h/da6949/32.png) [@hiremyWazer](https://community.wazer.com/u/hiremyWazer)
#### Post date: [March 11, 2023, 6:40am UTC](https://community.wazer.com/t/stained-glass-windows/672/3 "2023-03-11T06:40:05Z")

</div>

Hi guys  
This too is my first stained glass project, it took two tries to get the pieces right.

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/1X/c3c4a29ec9617bac70accbe112da907dd3d7710c.jpeg)

---

<div class="post-metadata">

### Author: ![Oratory](https://avatars.discourse-cdn.com/v4/letter/o/71c47a/32.png) [@Oratory](https://community.wazer.com/u/Oratory)
#### Post date: [March 13, 2023, 2:29pm UTC](https://community.wazer.com/t/stained-glass-windows/672/4 "2023-03-13T14:29:37Z")

</div>

Very nice work. What size is it?  
I have tremors in my hands so the soldiering is difficult for me but you have inspired me to give it another try. What amount of offset or margin between the pieces did you allow?

---

<div class="post-metadata">

### Author: ![hiremyWazer](https://avatars.discourse-cdn.com/v4/letter/h/da6949/32.png) [@hiremyWazer](https://community.wazer.com/u/hiremyWazer)
#### Post date: [March 13, 2023, 3:51pm UTC](https://community.wazer.com/t/stained-glass-windows/672/5 "2023-03-13T15:51:43Z")

</div>

I encourage you to try a smaller piece, dont worry about perfection do what makes you happy.  
No offset applied, just cut on line but experiment with smaller piece first.  
The size of this moth is 24”x 18”.  
Happy cutting.