# Putting oil in the pump

**URL:** <https://community.wazer.com/t/putting-oil-in-the-pump/915>\
**Category:** General Discussion\
**Created:** [February 14, 2024, 10:08pm UTC](https://community.wazer.com/t/putting-oil-in-the-pump/915 "2024-02-14T22:08:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![CBU-Wazer](https://avatars.discourse-cdn.com/v4/letter/c/e95f7d/32.png) [@CBU-Wazer](https://community.wazer.com/u/CBU-Wazer)\
**Post date:** [February 14, 2024, 10:08pm UTC](https://community.wazer.com/t/putting-oil-in-the-pump/915/1 "2024-02-14T22:08:13Z")

</div>

New user here - getting set up - I’ve gone through all of the set-up videos, and have gotten to a point where I’m ready to fill the Wazer with water and abrasive, and start cutting. My question - after changing the pump oil plug as detailed in the set-up videos and manual, I don’t see anything about actually putting oil in the pump. Where are the instructions on how to put oil in the pump? The oil can’t already be in there, right? Thanks in advance.

Mike Martin  
Cal Baptist University  
RIverside, CA

---

<div class="post-metadata">

**Author:** ![alindberg](https://avatars.discourse-cdn.com/v4/letter/a/e19adc/32.png) [@alindberg](https://community.wazer.com/u/alindberg)\
**Post date:** [February 15, 2024, 8:48pm UTC](https://community.wazer.com/t/putting-oil-in-the-pump/915/2 "2024-02-15T20:48:17Z")

</div>

if you are just getting your wazer and just changed the cap, the oil is in the pump already. You do not have to fill it before use.

They send you oil with it to do the first oil change which is after like 20-100 hours of use (In the maint section)