# Pump will not restart

**URL:** <https://community.wazer.com/t/pump-will-not-restart/621>\
**Category:** Help & Support\
**Created:** [January 5, 2023, 8:22pm UTC](https://community.wazer.com/t/pump-will-not-restart/621 "2023-01-05T20:22:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JIM](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@JIM](https://community.wazer.com/u/JIM)\
**Post date:** [January 5, 2023, 8:22pm UTC](https://community.wazer.com/t/pump-will-not-restart/621/1 "2023-01-05T20:22:32Z")

</div>

Hi Im new to the forum, name is Jim from Sydney Australia.

An issue I have had issues with is restarting, lets say you pause to remove a component.  
You go for the restart, it collects abrasive but then the nozzle starts to continue the cut but the pump does not kick in,  
Nothing you do will help, so I have to cancel and restart the cut , watch it go through the flight paths and restart at the required location.  
Very frustrating.

---

<div class="post-metadata">

**Author:** ![JIM](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@JIM](https://community.wazer.com/u/JIM)\
**Post date:** [January 6, 2023, 9:39am UTC](https://community.wazer.com/t/pump-will-not-restart/621/2 "2023-01-06T09:39:58Z")

</div>

I sorted it out.  
electromagnetic switches in the front seal on the lid had moved down inside the seal.