# Pause and Hood Opening

**URL:** <https://community.wazer.com/t/pause-and-hood-opening/668>\
**Category:** General Discussion\
**Created:** [February 13, 2023, 7:27pm UTC](https://community.wazer.com/t/pause-and-hood-opening/668 "2023-02-13T19:27:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Burdet](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Burdet](https://community.wazer.com/u/Burdet)\
**Post date:** [February 13, 2023, 7:27pm UTC](https://community.wazer.com/t/pause-and-hood-opening/668/1 "2023-02-13T19:27:06Z")

</div>

Hello,  
two months ago we bought a Wazer machine from your ERM dealer in France.  
However, when we open the door of the machine to retrieve the parts being machined, we cannot restart the program afterwards. We would like to be able to run the program, machine a part, automatically pause the program, retrieve the part, and restart the program. Currently, even when manually pausing, if we open the door, we can no longer restart the program.

---

<div class="post-metadata">

**Author:** ![Mark](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.wazer.com/mark/32/100_2.png) [@Mark](https://community.wazer.com/u/Mark)\
**Post date:** [February 15, 2023, 2:25pm UTC](https://community.wazer.com/t/pause-and-hood-opening/668/2 "2023-02-15T14:25:52Z")

</div>

Page 78 of the manual will show how to do what you are looking for. We do it a lot cutting glass

 ![image](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/1X/a4e014736e1c735221c16ca7163912eb3919a5d4.png)