# Not homing correctly

**URL:** <https://community.wazer.com/t/not-homing-correctly/885>\
**Category:** Help & Support\
**Created:** [January 10, 2024, 2:32am UTC](https://community.wazer.com/t/not-homing-correctly/885 "2024-01-10T02:32:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JIM](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@JIM](https://community.wazer.com/u/JIM)\
**Post date:** [January 10, 2024, 2:32am UTC](https://community.wazer.com/t/not-homing-correctly/885/1 "2024-01-10T02:32:22Z")

</div>

I had a lot of issues with the wazer on a job I do in glass today,  
In my frustration I pulled the boom towards me while it was still engaged and it know has an issue homing.  
It go’s to the top L/H corner but wants to keep driving into the location.  
Is there a calibration I can perform to reset this.

Jim

---

<div class="post-metadata">

**Author:** ![JIM](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@JIM](https://community.wazer.com/u/JIM)\
**Post date:** [January 10, 2024, 4:47am UTC](https://community.wazer.com/t/not-homing-correctly/885/2 "2024-01-10T04:47:53Z")

</div>

I have found a limit switch is faulty\< I will replace then go from there.

Jim
