# Not Cutting After Hopper Refill

**URL:** <https://community.wazer.com/t/not-cutting-after-hopper-refill/562>\
**Category:** Help & Support\
**Created:** [October 7, 2022, 3:49am UTC](https://community.wazer.com/t/not-cutting-after-hopper-refill/562 "2022-10-07T03:49:56Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jmount1992](https://avatars.discourse-cdn.com/v4/letter/j/858c86/32.png) [@jmount1992](https://community.wazer.com/u/jmount1992)\
**Post date:** [October 7, 2022, 3:49am UTC](https://community.wazer.com/t/not-cutting-after-hopper-refill/562/1 "2022-10-07T03:49:56Z")

</div>

Hi,

I have noticed that occasionally after the machine has paused and waited for a hopper refill the machine will not “unpause” correctly. It gets in a weird state where it thinks it is moving (you can see the x and y positions are changing) and it says it is “collecting abrasive” but the nozzle actually isn’t cutting or moving. Any thoughts?

Thanks

---

<div class="post-metadata">

**Author:** ![Alex](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.wazer.com/alex/32/14_2.png) [@Alex](https://community.wazer.com/u/Alex)\
**Post date:** [October 13, 2022, 6:22pm UTC](https://community.wazer.com/t/not-cutting-after-hopper-refill/562/2 "2022-10-13T18:22:25Z")

</div>

There is currently a known bug when using the “Restart Cut” feature that has some of the same observations you shared. When you experience this issue, are you using the “Restart Cut” feature?

---

<div class="post-metadata">

**Author:** ![jmount1992](https://avatars.discourse-cdn.com/v4/letter/j/858c86/32.png) [@jmount1992](https://community.wazer.com/u/jmount1992)\
**Post date:** [November 5, 2022, 12:54am UTC](https://community.wazer.com/t/not-cutting-after-hopper-refill/562/3 "2022-11-05T00:54:10Z")

</div>

It depends on where it is in the cut. Sometimes there are only a few more mm to go, so depending on the material, I will simply finish it by hand. Otherwise, I use the restart cut feature