# Gasket for lid on Wazer Pro

**URL:** <https://community.wazer.com/t/gasket-for-lid-on-wazer-pro/2163>\
**Category:** General Discussion\
**Created:** [October 23, 2026, 1:37pm UTC](https://community.wazer.com/t/gasket-for-lid-on-wazer-pro/2163 "2026-10-23T13:37:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kre8](https://avatars.discourse-cdn.com/v4/letter/k/e19b73/32.png) [@Kre8](https://community.wazer.com/u/Kre8)\
**Post date:** [October 23, 2026, 1:37pm UTC](https://community.wazer.com/t/gasket-for-lid-on-wazer-pro/2163/1 "2026-10-23T13:37:38Z")

</div>

Curious if anyone has found a gasket that works really well for sealing up the cover/lid on the Wazer Pro to help minimize any spray or mist from escaping the cutting chamber? I have a few things coming from McMaster to try but thought I’d check here as well.

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![Kre8](https://avatars.discourse-cdn.com/v4/letter/k/e19b73/32.png) [@Kre8](https://community.wazer.com/u/Kre8)\
**Post date:** [October 30, 2026, 4:38pm UTC](https://community.wazer.com/t/gasket-for-lid-on-wazer-pro/2163/2 "2026-10-30T16:38:55Z")

</div>

Ended up going with this gasket I found at McMaster. Completely eliminated any spray, mist, etc. from escaping around the lid. The triple layer of wipers works nice as the cover doesn’t line up the same all over the place.

> **[McMaster-Carr](https://www.mcmaster.com/4795N11/)**
>
> McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

 ![Gasket3](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/2X/2/244d22e28560453418218a5588b6a109fb4e4f5d.jpeg)

 ![Gasket1](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/2X/7/73f4f873a553272daeeea8e856c226ec6e293a91.jpeg)

 ![Gasket2](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/2X/b/bce1f1a07eceb885049a0fac9460466ad883f4d5.jpeg)

---

<div class="post-metadata">

**Author:** ![mikekinney](https://avatars.discourse-cdn.com/v4/letter/m/58956e/32.png) [@mikekinney](https://community.wazer.com/u/mikekinney)\
**Post date:** [November 3, 2026, 10:59pm UTC](https://community.wazer.com/t/gasket-for-lid-on-wazer-pro/2163/3 "2026-11-03T22:59:32Z")

</div>

Thanks for the suggestion. Is 10’ enough or did you buy 25’?