# Fusion 360 cam post processor

**URL:** <https://community.wazer.com/t/fusion-360-cam-post-processor/439>\
**Category:** Tips & Tricks\
**Created:** [June 22, 2022, 4:18pm UTC](https://community.wazer.com/t/fusion-360-cam-post-processor/439 "2022-06-22T16:18:35Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![Upgrade](https://avatars.discourse-cdn.com/v4/letter/u/ba8739/32.png) [@Upgrade](https://community.wazer.com/u/Upgrade)\
**Post date:** [May 26, 2025, 3:36pm UTC](https://community.wazer.com/t/fusion-360-cam-post-processor/439/21 "2025-05-26T15:36:24Z")

</div>

the .tools file is the tool cab file for the wazer standard nozzle. you could easily build a new tool in fusion as well, but I was trying to make it simple

---

<div class="post-metadata">

**Author:** ![Hhg74](https://avatars.discourse-cdn.com/v4/letter/h/b77776/32.png) [@Hhg74](https://community.wazer.com/u/Hhg74)\
**Post date:** [June 5, 2025, 9:40am UTC](https://community.wazer.com/t/fusion-360-cam-post-processor/439/22 "2025-06-05T09:40:19Z")

</div>

finally got a metric version of the fusion post processor up and running. just need to testrun the material library for wazer pro. thanks a lot, copilot! 🙂

[Previous page](https://community.wazer.com/t/fusion-360-cam-post-processor/439.md?page=1)