# Edit material in menu

**URL:** <https://community.wazer.com/t/edit-material-in-menu/930>\
**Category:** Help & Support\
**Created:** [March 5, 2024, 12:27am UTC](https://community.wazer.com/t/edit-material-in-menu/930 "2024-03-05T00:27:04Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JIM](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@JIM](https://community.wazer.com/u/JIM)\
**Post date:** [March 5, 2024, 12:27am UTC](https://community.wazer.com/t/edit-material-in-menu/930/1 "2024-03-05T00:27:04Z")

</div>

Hi everyone.  
If I go to edit materials and put in copper ,3mm feed rate pierce time bla bla.  
I am adjusting the lead length to 2mm, click save but it wont save, when I get to main menu to produce a g code it will not.  
So I am stuck with the software’s settings, am I doing something wrong.

jim