# Completely dead Wazer

**URL:** <https://community.wazer.com/t/completely-dead-wazer/2107>\
**Category:** Help & Support\
**Created:** [May 4, 2026, 10:43am UTC](https://community.wazer.com/t/completely-dead-wazer/2107 "2026-05-04T10:43:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bjarne](https://avatars.discourse-cdn.com/v4/letter/b/0ea827/32.png) [@Bjarne](https://community.wazer.com/u/Bjarne)\
**Post date:** [May 4, 2026, 10:43am UTC](https://community.wazer.com/t/completely-dead-wazer/2107/1 "2026-05-04T10:43:22Z")

</div>

Had been running flawlessly with a small cutting project.  
Inserted the SD card with a new project, but it refused to do a "dry run.

 ![20260504_121725](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/2X/2/2b1b0ca6667c9ad00ea45fa110b866fbe01d1cf0.jpeg)

 ![20260504_121738](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/2X/f/f28acbfa4e210e17f1273e8eefca5310b2ff53d6.jpeg)

 ![20260504_121758](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/2X/d/d7a9b6383402529dc08d49e5de04ce316a0ab75e.jpeg)

"  
Ok - I just started it anyway and pressed “Start.”  
A loud click came from the right side of the Wazer.  
Now it can do NOTHING - completely dead. There is not even a light in the display.  
Total hours so far on the machine **4** hours **49** minutes.

Any suggestions?

---

<div class="post-metadata">

**Author:** ![Bjarne](https://avatars.discourse-cdn.com/v4/letter/b/0ea827/32.png) [@Bjarne](https://community.wazer.com/u/Bjarne)\
**Post date:** [May 4, 2026, 3:18pm UTC](https://community.wazer.com/t/completely-dead-wazer/2107/2 "2026-05-04T15:18:22Z")

</div>

I am embarrassed.  
The water level was ok, but the emergency stop was pressed all the way down.  
It still can’t do a “Dry Run.”  
When I try to start a new job and press Start, there is just a loud click from the right side of the Wazer, and nothing happens.  
The display says “Cut completed”  
Total time 00:00:00  
Something is clearly not working.

---

<div class="post-metadata">

**Author:** ![Bjarne](https://avatars.discourse-cdn.com/v4/letter/b/0ea827/32.png) [@Bjarne](https://community.wazer.com/u/Bjarne)\
**Post date:** [May 8, 2026, 6:05pm UTC](https://community.wazer.com/t/completely-dead-wazer/2107/3 "2026-05-08T18:05:21Z")

</div>

The Wazer is running fine.

The biggest problem is the user of the machine

If it won’t run a “dry run,” there is something wrong with your G-code.

Btw. The SVG format is way easier to use than DXF.