# Abrasive hose holder

**URL:** <https://community.wazer.com/t/abrasive-hose-holder/162>\
**Category:** Tips & Tricks\
**Created:** [January 22, 2022, 9:41am UTC](https://community.wazer.com/t/abrasive-hose-holder/162 "2022-01-22T09:41:57Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![AJStubbsy](https://avatars.discourse-cdn.com/v4/letter/a/c89c15/32.png) [@AJStubbsy](https://community.wazer.com/u/AJStubbsy)\
**Post date:** [January 22, 2022, 9:41am UTC](https://community.wazer.com/t/abrasive-hose-holder/162/1 "2022-01-22T09:41:58Z")

</div>

Hi all, I’ve made a 3D print design to hold the abrasive hose and plug the hose hole, while performing Water Levelling, Tank cleaning etc. I’ll share it here, just in case it’s of use to some of you.

> **[WAZER Hose Holder by AJStubbsy](https://www.thingiverse.com/thing:5167773)**
>
> This is an adapter to hold the abrasive hose of the WAZER waterjet cutter, for whenever it has to be removed for maintenance.
> DON'T FORGET TO REMOVE IT BEFORE CUTTING!!

I’d recommend printing in red, so you don’t forget it is in place!

Thanks and happy cutting 👍

---

<div class="post-metadata">

**Author:** ![ORU](https://avatars.discourse-cdn.com/v4/letter/o/34f0e0/32.png) [@ORU](https://community.wazer.com/u/ORU)\
**Post date:** [January 24, 2022, 2:22pm UTC](https://community.wazer.com/t/abrasive-hose-holder/162/2 "2022-01-24T14:22:25Z")

</div>

[AJStubbsy](https://community.wazer.com/u/AJStubbsy)  
Thanks for the download. Printing one now.  
Did you use o-rings on the male end?

---

<div class="post-metadata">

**Author:** ![AJStubbsy](https://avatars.discourse-cdn.com/v4/letter/a/c89c15/32.png) [@AJStubbsy](https://community.wazer.com/u/AJStubbsy)\
**Post date:** [January 25, 2022, 12:16pm UTC](https://community.wazer.com/t/abrasive-hose-holder/162/3 "2022-01-25T12:16:49Z")

</div>

No it’s a really nice fit for me without O-rings.

Glad it’s of some use 👍

---

<div class="post-metadata">

**Author:** ![Alex](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.wazer.com/alex/32/14_2.png) [@Alex](https://community.wazer.com/u/Alex)\
**Post date:** [January 25, 2022, 8:20pm UTC](https://community.wazer.com/t/abrasive-hose-holder/162/4 "2022-01-25T20:20:19Z")

</div>

Hey @AJStubbsy! Welcome to the Forum! Sharing a file over thingiverse is a great way to share files, and I greatly appreciate it. Thank you! 😃

A tool like this can be a powerful reminder to get users in a good habit! I personally like to keep the abrasive hose removed from the nozzle at all times until I am ready to start the cut. This helps manage and keep backflows/clogs to a minimum. I’ve got this file saved to my desktop and am looking forward to sharing it with the dev team later 🕶

---

<div class="post-metadata">

**Author:** ![DawnWazer](https://avatars.discourse-cdn.com/v4/letter/d/919ad9/32.png) [@DawnWazer](https://community.wazer.com/u/DawnWazer)\
**Post date:** [November 3, 2022, 11:19pm UTC](https://community.wazer.com/t/abrasive-hose-holder/162/5 "2022-11-03T23:19:29Z")

</div>

Thanks for sharing this file, don’t have a 3D printer, but have a couple of friends who can help out, great little tool for keeping that hose out of the way.

---

<div class="post-metadata">

**Author:** ![matthewschmidt1](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.wazer.com/matthewschmidt1/32/972_2.png) [@matthewschmidt1](https://community.wazer.com/u/matthewschmidt1)\
**Post date:** [December 2, 2025, 5:24pm UTC](https://community.wazer.com/t/abrasive-hose-holder/162/6 "2025-12-02T17:24:51Z")

</div>

could you make one for me too please? I do glass fusing … perhaps my contribution will be of use to you in the future.