# 3D printed door joints for the Wazer! **URL:** \ **Category:** Projects\ **Created:** [May 17, 2023, 9:09am UTC](https://community.wazer.com/t/3d-printed-door-joints-for-the-wazer/731 "2023-05-17T09:09:18Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Fablab\_Descartes](https://avatars.discourse-cdn.com/v4/letter/f/8edcca/32.png) [@Fablab\_Descartes](https://community.wazer.com/u/Fablab_Descartes)\ **Post date:** [May 17, 2023, 9:09am UTC](https://community.wazer.com/t/3d-printed-door-joints-for-the-wazer/731/1 "2023-05-17T09:09:18Z")
Hi all ! We were tired of using masking tape to prevent water and sand to come out of the sides of the door during cuts, so I made those 3D printed joints : [https://www.thingiverse.com/thing:6030521](https://www.thingiverse.com/thing:6030521) They just snap on the sides of the acrylic door et work perfectly ! Spacing between the side of the door and the frame is not the same on both sides, but I guess it can vary on each machine, so I uploaded the Fusion360 file as well so you can make your own adjustments. ![IMG_8034](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/1X/3df046506a6874ff3b0db855b8e4b7ca09bd0765.jpeg) ![IMG_8035](https://canada1.discourse-cdn.com/flex027/uploads/wazer/original/1X/124f70417e6293dab25b5215600b30dca894a2d3.jpeg) ---
**Author:** ![Glasstastisk](https://yyz1.discourse-cdn.com/flex027/user_avatar/community.wazer.com/glasstastisk/32/710_2.png) [@Glasstastisk](https://community.wazer.com/u/Glasstastisk)\ **Post date:** [October 5, 2023, 5:48pm UTC](https://community.wazer.com/t/3d-printed-door-joints-for-the-wazer/731/2 "2023-10-05T17:48:08Z")
Brilliant! Yes, just bough the machine and I was wondering why this is not already fitted on the machine. I was also wondering why the gaps differed on each side. On my machine the gap on the left hand side near the buttons and SD card has a larger gap, hence a greater chance of water and sand flying out.